Digital System Planning Considerations MCQ’s

Read Time:2 Minute, 26 Second

This set of Optical Communication Multiple Choice Questions & Answers (MCQs) focuses on “Digital System Planning Considerations”.

1. Sampling rate for each speech channel on 32-channel PCM is 8 KHz each encoded into 8 bits. Determine the transmission rate for system with 256 bits in a frame.
a) 2.96 Mbits/s
b) 2.048 Mbits/s
c) 3.92 Mbits/s
d) 4 Mbits/s

2. Sampling rate for each speech channel on 32-channel PCM is 8 KHz each encoded into 8 bits. Determine the bit duration with transmission rate of 2.048 M bits/s.
a) 388 ns
b) 490 ns
c) 488 ns
d) 540 ns

3. Sampling rate for each speech channel on 32-channel PCM is 8 KHz each encoded into 8 bits. Determine number of bits in a frame.
a) 64
b) 128
c) 32
d) 256

4. The bit duration is 488 ns. Sampling rate for each channel on 32-channel PCM is 8 KHz encoded into 8 bits. Determine the time slot duration.
a) 3.2 μs
b) 3.1 μs
c) 7 μs
d) 3.9 μs

5. Sampling rate for each speech channel on 32-channel PCM is 8 KHz each encoded into 8 bits. Determine the duration of multi-frame if duration of a frame is 125μs.
a) 2ms
b) 3ms
c) 4ms
d) 10ms

6. Compute average number of photons incident at receiver in APD if quantum efficiency is 80%, F (M) = 4, SNR = 144.
a) 866
b) 865
c) 864
d) 867

7. Sampling rate for each speech channel on 32-channel PCM is 8 KHz each encoded into 8 bits. Determine duration of frame with time slot duration of 3.9μs.
a) 125 μs
b) 130 μs
c) 132 μs
d) 133 μs

8. Determine excess avalanche noise factor F(M) if APD has multiplication factor of 100, carrier ionization rate of 0.02.
a) 3.99
b) 3.95
c) 4.3
d) 4

9. Determine total RMS pulse broadening over 8 km if RMS pulse broadening is 0.6ns/km.
a) 3.6 ns
b) 4 ns
c) 4.8 ns
d) 3 ns

10. Determine incident optical power if zm=864, wavelength = 1μm.
a) -85 dBm
b) -80 dBm
c) -69.7 dBm
d) -60.7 dBm

11. Determine total channel loss if connector loss at source and detector is 3.5 and 2.5 dB and attenuation of 5 dB/km.
a) 34 dB
b) 35 dB
c) 36 dB
d) 38 dB

12. Determine wavelength of incident optical power if zm=864, incident optical power is -60.7 dB, BT=1 * 107.
a) 1 μs
b) 2 μs
c) 3 μs
d) 4 μs

13. Determine RMS pulse broadening over 8 km if total RMS pulse broadening is 5.8ns/km.
a) 0.2ns/km
b) 0.1ns/km
c) 0.4ns/km
d) 0.72ns/km

14. Determine length of the fiber if attenuation is 5dB/km, splice loss is 2 dB/km, connector loss at source and detector is 3.5 and 2.5.
a) 5 km
b) 4 km
c) 3 km
d) 8 km

Happy
Happy
0 %
Sad
Sad
0 %
Excited
Excited
0 %
Sleepy
Sleepy
0 %
Angry
Angry
0 %
Surprise
Surprise
0 %

Average Rating

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Leave a Reply

Your email address will not be published. Required fields are marked *

Previous post System Design Considerations MCQ’s
Next post Analog Systems MCQ’s